How to install a Female Sleeve

Performing service on your mixer is the key to ensure long life for your equipment and avoid unforeseen downtime.

One part that needs regular service is the Female Sleeve. The Female Sleeve is a part of the Mix Head and serves, together with the Male Post, as the Mixer's bearing.

How often do you need to perform a service?

By performing regular service and replacing spare parts, you can eliminate the risk of unforeseen malfunctions due to wear. The timeframe for when you need to replace spare parts vary depending on application area, and it is therefore recommended that you do this on a regular basis. A yearly inspection is recommended.  

Inspect the bearing for cracks and abnormal wear.

Even though the O-rings might not show any signs of wear, it is crucial to replace them on a regular basis. Also, whenever you remove the Female Sleeve, the O-rings must be replaced. When reinstalled it is important to use lubricant to ensure that the O-ring enters its proper position. 

After installation, it is important to inspect that the O-rings are intact and in the right position. Equal amounts of the upper and lower O-rings should be exposed and visible. By doing this simple step, you will ensure a correct installation.

How to replace a Female Sleeve